Siding installation

Siding installation done right in Greenville SC

Siding installation won’t be a problem for your house anymore as top roofers in Greenville SC have got you covered. They are here to guide you through the installation process.

Prepare the exterior

Because of the reason that the siding is going to be installed on an existing wall, there can be holes, cracks, dents, and other structural defects. This is exactly what you want to avoid happening, which leads to the first step of installing vinyl siding, which is to make sure that you repair anything damaged on the exterior of your house before beginning the whole process otherwise, it may cause complications.

 Install moisture barrier

Use sheathing plywood as it can provide a soft and smooth surface for the vinyl siding, allowing it to sit properly on the wall without falling off.  It is important to choose the one most suitable for your siding and once you do, place a water vapor barrier.

Install soffit and fascia siding

Soffit is known as the siding, which is installed underneath the overhang of a roof, and a fascia is the exposed board that is placed on the front. It may or may not be the same color as the other siding.

To begin with, during the whole installation process, nail a few J-Channels underneath the fascia. It provides a water-tight seal while hiding the cut edges of the soffit. Now measure and cut the vinyl siding to fit the soffit. Proceed to install the soffit piece into the J channel that was installed earlier.

Install the starter strip

The starter strip is fitted where the siding begins to hook the first row of the siding. Once you have identified your starting point, drive a nail through it and use a chalk line to mark the point around the perimeter of your house. Now, install the starter strip over the chalk line, making sure it is not nailed in too tightly that it restricts the movement of the panel. Also, don’t forget to leave a ¼-inch gap between each strip to allow for expansion, and check to see if the panel is level before proceeding.

Install siding panels

Nail the vinyl pieces to the wall, keeping your nails 16 inches apart and at the center of the provided nailing slots. And as with the J-channel, don’t nail too tightly; leave enough space between the holes and the nail heads to allow for expansion and movement. Overlap panels at the seams by about one inch or as instructed by the manufacturer.

Find top roofers for siding installation in Greenville SC

If you’ve got a roof, you need us! We’re here to sort out all your roofing problems, so you don’t have to suffer through another restless night. While you’re busy with your everyday life, we’re here to sort out the behind-the-scenes to make sure you don’t have too much on your plate. We’re just a call away! Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

Siding installation

Siding installation expert in Charlotte NC explains ways you can prepare for siding replacement

Siding installation experts replace your siding to protect your home

A siding installation expert in Charlotte NC can help take care of your property. For the majority of homeowners, replacing the siding requires a sizable investment. Both the aesthetic appeal and energy efficiency of your home will be improved. However, it’s ideal to make sure you and your property are appropriately prepared for the work a skilled and professional siding contractor will accomplish before the siding installation can start.

Here are some things you may do to get ready before your contractor arrives at your house.

Clear items on walls

Your home’s interior walls may shake as siding is removed and installed. Take down any decorations you have hanging on the walls, such as framed pictures or works of art.

Because of all the shaking, fragile goods could tumble off of shelves and tables. Put these things away in a secure location where they will be shielded from damage.

Trim trees and shrubs

Your home’s exterior may be surrounded by shrubs or trees that could obstruct the installation of siding. Cut the grass short and trim them back if necessary. This will make it simpler for the installers to pick up dropped nails or staples using a magnetic nail finder. In order to prevent debris from collecting in your flower bed or garden, make sure you cover it with a drop cloth or tarp.

Pack your car away from the house

You can count on the delivery of a dumpster and your new siding, most likely a day or two before the installation team shows up. Clear the driveway and garage so the dumpster may be placed there. Access will also be required so that workers may remove the existing siding.

For the duration of the siding installation, you might wish to move your automobile to another location in your neighborhood. It reduces the possibility of loose debris damaging your car.

Cut out exterior power

To reduce the chance of shock, siding replacement specialists advise shutting off the electrical to your outdoor lights.

Keep children and pets away

Installing siding is a noisy project. Make sure that your kids and animals are out of the work area. You might want to make alternative arrangements if you work from home.

#1 siding installation expert and top roofers in Charlotte North Carolina

Siding replacement can be time-consuming, so you should try preparing before experts arrive. Find the best siding installation expert in Charlotte NC for the best result.

Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas, including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

Siding installation

Siding installation in Greenville SC: top roofer uses the best materials

Siding installation is often a part of the construction process that is often neglected and not done properly. It is important that this process is done by experts using the right materials so you don’t run into any issues later on.

Starter strip

Any vinyl siding installation job must begin with the vinyl starter strip as a necessary accessory. Starter Strips, which must be level, are used at the base of each wall in the house. To secure the first level of siding in place, do this.

Carpenter’s square

A carpenter’s square, which is made of flat steel or aluminum, is the best tool for marking a straight edge for cutting. There are probably other tools you could use instead of this, but Carpenter’s Square is the best and most recommended amongst them all. And it is super-efficient and effective. Therefore, it’ll be a great help to you.

Safety Glasses

Safety is everyone’s number one priority. Especially for those who take risks to do their job properly. This is why it is important to have safety glasses along with any other materials to provide complete protection during the installation.

Felt Tip Pen

The measured parts must be marked with a felt tip pen. The felt pen will clearly leave a mark on the vinyl as opposed to a ball tip pen or pencil. And again, it is recommended instead of any other regular pen, etc.

 Mason’s Line Level

Mason’s line level is used to draw straight lines in important constructions just like siding installation. Any other tool could be used to draw significant straight lines but for siding installation, mason’s line level is the most recommended out of them all.

Tin Snips

A tin snip is used to cut the vinyl panel to the required point. A hand saw is also used but you should find one that is suitable for cutting the sidings and is easy to use. Tin Snips offer more control and ease during their usage.

Hammer

Hammer is a necessity no matter what the construction project is.

Hammers are basically the only tool you can use to break things or to drive in nails. It’s important for its specific role in installing sidings.

Find the best siding installation team in Greenville SC

If you’ve got a roof, you need us! We’re here to sort out all your roofing problems so you don’t have to suffer through another restless night. While you’re busy with your everyday life, we’re here to sort out the behind-the-scenes to make sure you don’t have too much on your plate. We’re just a call away! Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

Siding installation

Siding installation comes with varieties in Greenville SC

Siding installation has to be done with precision and accuracy by top roofers who use the perfect materials to suit your Greenville SC home. Here are your options.

Steel Tape Measurer

To calculate the quantity of vinyl siding material required to finish the task, a tape measure is required. It is one of the most basic yet necessary requirements. Without it, there could be miscalculations and complications. Therefore, to measure the quantity of vinyl siding material, measure the distance in feet between the eaves and the bottom of the siding on the house’s perimeter. To determine the primary square footage, multiply the perimeter by the height.

Tin Snips

The vinyl panels are simply trimmed to the right length with Tin Snips. Use the snips with the red or green handles, depending on which hand you work better with. Panels can also be cut using a hand saw, but for vinyl siding, tin snips provide more control. Using a utility knife, score vinyl panels horizontally where a full panel is not required, such as beneath a window. Mark the area with a notch. Use the utility knife to make horizontal scores.

Snap Lock Punch

Panels that have been pressed into the utility trim can be given dimples by using a vinyl snap lock punch. The final trim at the top of a wall or below a window will be attached to the finished vinyl siding and skirting with a snap lock punch.

Hammer

A hammer is used to drive nails into each vinyl siding panel. Drive nails straight in the center of the nail slot and never nail any piece tightly. For the end product to not expand and contract, pieces should move from side to side.

Unlocking Tool

The siding panel can be replaced or removed using the unlocking tool without worrying about harming the siding. By latching the tool’s curved end onto the butt lock’s back lip and sliding it under the panel’s end. Pulling down and gliding the tool along the length of the panel will release the siding from the lock. Exactly the same steps must be taken to relock a panel.

Find top roofers for siding installation in Greenville SC

If you’ve got a roof, you need us! We’re here to sort out all your roofing problems so you don’t have to suffer through another restless night. While you’re busy with your everyday life, we’re here to sort out the behind-the-scenes to make sure you don’t have too much on your plate. We’re just a call away! Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

Siding installation

Siding installation experts in Charlotte NC explain preparation for siding installation

Siding installation helps keep your wall in the best condition and improves curb appeal

Siding installation experts in Charlotte NC handle siding installation to help improve your home’s beauty and add a layer of protection to your wall. The siding protects the wall from harsh elements like rain and ice that can cause moisture damage to the wall.

Preparing your home is the first step to having the siding installation project go smoothly. Here are some ways you can prepare for siding installation.

Prepare your outdoors

Trimming your lawn’s grass is a good way to start getting the outdoors ready. With their magnetic nail finder, the professionals can simply pick up wayward nails and staples in this manner. If there are any trees or shrubs planted close to your house, make sure to cut back any overgrown branches so they won’t obstruct the installation. Additionally, remove patio furniture, potted plants, and other mobile items from the prospective work area. As the staging location for the delivery of the new siding and the transportation of the old siding, make sure that the driveway is also free of obstructions.

Prepare the indoors

Even while siding installation makes a mess outside your house, it still has an impact on the inside as well. The shaking caused by removing the old siding and putting up the new ones could cause surrounding valuables to fall and break. Take down any artwork and picture frames that are hanging on the wall. Place fragile ornamental pieces on shelves or tables apart from your interior walls.

To reduce the chance of shock, siding replacement specialists advise turning off the electrical for your outdoor lighting. Make sure your children and dogs are kept away from the work area since their security and safety are vital.

Maintain communication

Before the task begins, it’s crucial to have a discussion. Discuss start and stop timings, yard features to watch out for, parking preferences, and weekend working hour choices with your siding contractor. Your siding replacement experience will be improved if you get along well with the project manager and crew.

Find the best siding installation experts in Charlotte NC

Preparation for the siding installation can help make sure the project is a success. Work with the best siding installation experts for top results. Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas, including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

Siding installation

Siding installation is beneficial for your Greenville SC house

Siding installation is a very important part of your Greenville SC home. It can be very beneficial if done properly by the top roofing company.

Energy efficiency

Insulation can be added to the external walls of your home by the contractor when you have your home’s sidings replaced. Even if you don’t add any more insulation to your home, installing new siding can stop heat from escaping and keep your house warmer. During the summer, it prevents the heat from the outside from entering the inside.

Increase value

You need to think about everything that may possibly go wrong if you want to sell your house. Make it appear attractive to prospective purchasers, cut down on the amount of cleaning and fixing that would need to be done in the event that someone made an offer, and check to see that the property’s structure is in good shape. When you have to sell your property, replacing the siding on your house might recover more than 90 percent of the money you spent on it.

Improve appearance

Everyone wants their house to have a polished appearance. It is one of the most important investments you will ever make and the place where you will spend the majority of your life. Because some materials are made to withstand deterioration from the damaging effects of the sun’s ultraviolet (UV) rays, properly installed sidings also help your home maintain its attractive appearance for a longer period of time. You have to create the precise appearance you want for your house because there are so many different materials from which to pick.

Hide damage

You can repair any damage that has been done to the inside walls of your home while you are installing new siding, which is yet another important advantage of replacing your home’s siding. Even very small damage to the outer siding might result in significant issues for the walls that lie behind it if water or insects are able to penetrate it. In the event that these issues are not addressed, they may begin to eat away at your walls and lead to major structural problems. Because of this, removing your siding is essential if you want to be able to access to these potentially hazardous areas and remedy them before they can become a more significant problem.

 Find top roofing company for siding installation in Greenville SC area

If you’ve got a roof, you need us! We’re here to sort out all your roofing problems so you don’t have to suffer through another restless night. While you’re busy with your everyday life, we’re here to sort out the behind-the-scenes to make sure you don’t have too much on your plate. We’re just a call away! Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

Siding installation

Siding installation experts in Charlotte explain vinyl siding’s fastening procedure

Siding installation involves proper fastening of the panels to a wall

Siding installation experts in Charlotte NC know how to install vinyl siding in the right way. One of the processes they handle is the siding’s fastening to the wall. The choice of the right fastening material and process will make sure the end product is appealing.

Here is a complete outline of the vinyl siding fastening procedure.

Get the right materials for the fastening procedure

You can go for various fastening materials, including:

  • Nails – heads should be at least 7.9mm in diameter and 38.1 mm in length. If your siding has a backer board, your nails should be longer, at least 63.5mm.
  • Screw fasteners – screws should be at least a size eight and corrosion-resistant.
  • Staples should not be less than 25.4mm in length. Go for a 16-gauge option that is semi-flattened.

You should choose corrosion-resistant fastening material, preferably galvanized steel, aluminum, or stainless steel.

Cutting vinyl siding accurately

Most sharp objects can cut vinyl sidings, but we recommend tin snips, circular saws, scoring tools, or utility knives for a safer and cleaner cut.

When cutting:

  • Have your safety goggles on while following all proper construction practices.
  • For tin snips, avoid closing the blades fully at the end of each stroke.
  • If you are using a circular saw, install the blade backward and cut slowly. Vinyl material is often delicate, and cutting in the reversed direction works well.
  • Utility knives and scoring tools can snap the siding in half with medium pressure.

Vinyl siding fastening procedure

  1. Regardless of your fastener choice, you should make sure they penetrate at least ¾ into the furring or framing stud.
  2. Make sure the panels are well locked along the bottom length. Do not pull or force the panels upward when nailing.
  3. Leave some allowance, preferably 0.8mm, between the siding and the head of the fastener. The clearance makes sure the siding does not buckle when it experiences some temperature change.
  4. Fasten in the center of the panel first and work your way towards the ends.
  5. Your fasteners should be well placed in the center of each siding to allow for expansion and contraction.
  6. You should drive the fasteners straight to avoid panel buckling or distortion.

Work with the best siding installation experts in Charlotte NC

Fastening vinyl siding can be complex for a DIY job. It would be best to trust the experts with the siding installation job for the best results.

Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

 

Siding installation

Siding installation is beneficial for Greenville SC home owners

Siding installation can give your Greenville SC home a new look while also improving security. We completely understand how doing some maintenance and installation work on your own may appear to be the ideal option because you’d believe you’d be saving a lot of money. But, in reality, it might be a lot more expensive than you think, since if something goes wrong, you’ll have to pay a lot of money again to repair the sidings. In extreme circumstances, you may have to fully rebuild it and add new sidings, which would absolutely devastate your finances. We’ll describe what happens throughout a siding installation or restoration process to help you understand why you need professional expertise.

Vinyl for siding installation

Vinyl is one of the most popular materials used in siding installations for Greenville SC homes. There has obviously got to be a reason behind this as people aren’t just choosing this material for no reason. Here are the top benefits of choosing vinyl for your siding installation:

  • Fast and uncomplicated installation: The vinyl siding installation speed is unmatched. This is one of the reasons roofing contractors favor it. Unlike many other forms of siding, which may be difficult for professionals to install, vinyl siding installation is quick and easy. Because the material is low in weight, it is reasonably easy to install in your home. This also offers further benefits to you as the homeowner by lowering labor expenses and shortening the time the homeowner will be inconvenienced while the installation is being finished.
  • It takes little to no maintenance and is inexpensive: No one wants to deal with the stress of having to climb onto the roof due to the siding installation option they choose. Vinyl siding is popular not just for the protection it provides to your roof and other obvious home improvement benefits, but also because it is inexpensive and incredibly cost-effective. When compared to other forms of external siding and cladding, vinyl is nearly usually the least priced choice, making it the clear winner in that category. Unlike wood or stone, which can require significant (and often expensive) care, vinyl siding installation requires very little maintenance. Cleaning vinyl is simple, stress-free, and can be done quickly with a cloth, water, and a common cleaning solution.

Find top siding installation service in Greenville SC

If you’ve got a roof, you need us! We’re here to sort out all your roofing problems so you don’t have to suffer through another restless night. While you’re busy with your everyday life, we’re here to sort out the behind-the-scenes to make sure you don’t have too much on your plate. We’re just a call away! Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

Siding installation

Siding installation in Charlotte NC: top roofer discusses pros and cons

Siding installation professionals in Charlotte NC talk about the pros and cons of fiber cement siding 

Siding installation professionals in Charlotte NC note that attaching fiber cement siding to the outside of your home or other building is an attractive and durable option. It masquerades as masonry or wood and can aid your property with weathering the most complex elements of your local environment.

Advantages of fiber cement installation

Makers produce fiber cement installation by merging Portland concrete cement with wood pulp so you may boost the moderateness, toughness, and appearance of your property. Fiber cement siding’s primary advantage is resistance to corrosion, fire, wind, and mold. This means your home’s facade and roof will remain attractive for an extended period.

Versatility

The siding may be molded into a wide variety of designs because of the fiber cement used to manufacture it. As a result, fiber concrete is your best option if you want the look of wood but need something more durable and environmentally friendly, fiber concrete is your best option.

Inconveniently low-maintenance

Any item or substance that reduces the burden of maintaining a house is a substantial benefit. Once the siding is installed, regular maintenance will include cleaning and checking it once a year

The disadvantage of fiber cement installation

Many siding products are plagued by dampness and wetness. Because the siding does not allow much evaporation, improper assembly or installation might allow water to escape under the sheets, leading to rot and mold development. Here are some cons of fiber cement installation.

  • Installation is expensive and time-consuming.
  • Fiber concrete might be more expensive to install than other materials because of the time and effort. There is a lot of fiber concrete in this structure.
  • It cannot be recycled.

Fiber concrete siding’s components are considered latent from an ecological standpoint; therefore, dumping it in a landfill or another disposal location won’t degrade into anything harmful. Contrary to other siding materials (especially aluminum), fiber cement has no reuse possibility.

When weighing the pros and drawbacks of fiber concrete siding, it is clear that it has much more advantages and covers almost all of your requirements, making it an excellent siding choice for you. You can get professional consultation from Steele Restoration to help you make the best decision on the siding installation you need in Charlotte NC.

Best siding installation expert in Charlotte NC, pros and cons

Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.

Siding installation

Siding installation in Greenvillle SC for hassle-free installation

Siding installation for Greenville SC homes can be a real pain without the assistance of top roofers who are skilled in dealing with these types of circumstances. We completely understand how doing some maintenance and installation work on your own may appear to be the ideal option because you’d believe you’d be saving a lot of money. But, in reality, it might be a lot more expensive than you think, since if something goes wrong, you’ll have to pay a lot of money again to repair the sidings. In extreme circumstances, you may have to fully rebuild it and add new sidings, which would absolutely devastate your finances. Let’s take a look at some scenarios we’ve dealt with to explain this a bit better.

Moldy sidings

We were called for a consult to a Greenville SC house that was going to begin renovations. The house was pretty old but just had a new owner who wanted to flip the house and then possibly sell it to make a good profit. One of the things that needed to be replaced was the sidings. They were really old and worn out. They weren’t even doing what they were intended to anymore. We noticed the sidings were moldy and that was probably because the water-resistance layer wasn’t installed properly either. We had to completely change the paneling into something more resistant. After discussing with the owner, we settled upon vinyl as it had a long lifespan and was pretty sturdy to weather and other damages. Vinyl is also pretty customizable in terms of color and design and so it would make it the perfect material for a home that needed to be flipped and sold later on. After we were done with the entire house, the owner had a look at it for the first time and was satisfied with the results.

Bad insulation

We were called for a consult to a Greenville SC house that was facing some heating issues. The couple told us they had the heating company check it out and they believed the issue was the house itself and not the heating system. We were recommended to be called for a consult. We then examined the house to find out that the sidings were really held and weren’t insulating the house properly anymore. We had them replaced with brand new ones which completely eliminated the heating problem.

Best siding installation service in the Greenville SC area

If you’ve got a roof, you need us! We’re here to sort out all your roofing problems so you don’t have to suffer through another restless night. While you’re busy with your everyday life, we’re here to sort out the behind-the-scenes to make sure you don’t have too much on your plate. We’re just a call away!

Steele Restoration is a fully licensed and insured Charlotte NC and Greenville SC-based general contractor and roofing company specializing in roofing, siding, and storm damage restoration for single-family homes, multi-family complexes, and commercial and industrial sites. We service Charlotte and surrounding areas including Rock Hill, Lake Norman, Steele Creek, Matthews, Ballantyne, and Blakeney, along with Greenville and Spartanburg SC areas.